Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Nylon strap
Metal bracket
Long screw
Tools required (not provided): Phillips screwdriver, stud finder, pencil, tape measure, power drill and
18. Position the assembled unit at the desired location against a wall. If necessary, adjust the pre-attached
Floor Levelers at the bottom of the Legs (C) to level the unit.
19. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraint to the Back Frame (G) and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the
unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not
earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
20. The TV stand is now ready for use.
Assembly Instructions
Unscrewed bolt
Wooden stud
1/8" drill bit.
15
Wall
C
Floor leveler
Tabla de contenido
