Idiomas disponibles
Idiomas disponibles
Dash Disassembly 99-6504
Jeep Wrangler
2003-2006
1. Unsnap and remove defroster grille
panel near windshield. (Figure A)
2. Remove (2) Phillips screws
exposed at the top of the center
dash panel and unsnap and
remove panel.
3. Remove glove box door to access
one 10 mm nut on back of radio.
4. Remove (4) Phillips screws
securing radio. Disconnect and
remove radio.
Continue to kit assembly
(Figure A)
Kit Assembly 99-6504
ISO head unit provision
with pocket
1. Attach the ISO brackets to the
radio housing by sliding the
bracket tabs into the housing slots.
(Figure A)
2. Slide the aftermarket head unit into
the radio housing.
3. Align the holes in the head unit
with the holes in the ISO brackets
and mount the head unit to the
brackets with (4) screws supplied
with the unit. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
6
(Figure A)
(Figure B)
Capítulos
