AD Instruments AD8108 Manual De Usuario página 27

AD Instruments
________________________________________________________________________
In which, the figure (e.g. 12) after the pair is the pair line number and it is the
length after the line number.
At the moment, push A==== key to restart test or push PAIR&L key to return
the main menu.
Test Result 3: Abnormal pair and length (PAIR & LENGTH) display
It will display the paired lines first if there is unpaired lines in the pair and length
(PAIR & LENGTH) measurement:
In which, the last line (78) indicates there is no pair is found in lines 7 and 8, at
the moment, it will display the length of unpaired line number (as shown below):
if you push the key: ( Or push PAIR&L key to return the main menu)
It will display "X" to indicate an open circuit if the length is less than 90%
of other line pair length and the open circuit is located at around 89.7
M from the tester. (The open circuit line number could be rechecked by
WIREMAP function.)
At the moment, push =A key to go back previous picture and éìëÜ
âÉó=íç=ëÜçï=ÑìêíÜÉê=ìåé~áêÉÇ=äáåÉ=åìãÄÉê=äÉåÖíÜK=Elê=éìëÜ=m^foCi
âÉó=íç=êÉíìêå=íÜÉ=ã~áå=ãÉåìF
©Copyright Abacanto Digital SA.
27
Manual de usuario AD8108