1. Safety indications
ATTENTION B
INDICATIONS HAVE BEEN READ CAREFULLY AND UNDERSTOOD IN ORDER TO PREVENT
CONTACT WITH ELECTRICITY
BE CONSERVED FOR FURTHER CONSULTATION AT A LATER DATE
Series CLOUD chain actuators have been designed to move windows.
Use for any applications other than those indicated must be authorised by the
manufacturer after technical review of the assembly.
The following safety indications should be observed carefully.
The appliance must be installed by competent and qualified technical personnel.
After removing packaging, check for any damage on the appliance.
Plastic bags, polystyrene, small metal parts such as nails, staples etc should be placed
out of the reach of children as they constitute a potential source of risk.
Before connecting the appliance, check that the power supply has the same
specifications as those indicated on the technical data label on the appliance.
This machine is destined exclusively for the use for which it has been designed and the
manufacturer accepts no responsibility for damage incurred by improper use.
The actuator is destined exclusively for installation indoors. For any special application
we recommend you consult the manufacturer beforehand.
The actuator must be installed in accordance with the manufacturer's instructions.
Failure to respect these instructions could compromise safety.
Power supply installation must comply with any regulations in force.
To ensure efficient separation from the grid, an approved type of bipolar pulse switch
should be used. An omnipolar general power switch with minimum distance of 3 mm
between contacts should be installed upstream of the control line.
Do not use solvents or jets of water to wash the appliance. The appliance should not be
submerged in water.
Repairs should only be performed by qualified personnel at assistance centres
authorised by the manufacturer.
Always request exclusive use of original spare parts. Failure to respect this condition could
compromise safety and invalidate the benefits contained in the warranty for the appliance.
In the event of any problems or queries, consult your agent or contact the manufacturer directly.
With bottom hung windows injury could be caused if the window accidentally falls. An
appropriately sized flexible link arm or fall prevention safety system designed to resist a
force equal to at least three times the total weight of the window MUST be installed.
Danger of crushing or dragging. During function, when the actuator closes the
window, a force of 300N is exerted on the bead of the frame, enough to crush fingers
in the event of distraction.
Ensure that the stroke-end selection is less than one centimetre from mechanical
stop blocks, stroke limiters or any physical obstacles blocking opening of the sash.
In the event of breakage or malfunction, switch the appliance off at the general
switch and call for the services of a qualified technician.
Page 4
EFORE
INSTALLING
,
INJURY OR ANY OTHER INCIDENT
ATTENTION
,
THIS
APPLIANCE
ENSURE
ALL
SAFETY
.
THE MANUAL SHOULD
.