Pan Detection; Residual Heat Indication; Control Panel Locking; Cooking Advices - M-system Topline MIB60 Manual Del Usuario

Pan detection

The pan detection ensures a perfect safety.
The induction doesn't work :
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disapears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put
any heat sensitive object on them . There are risks of burn and fire.

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).

Locking :
Action
Start
Hob locking

Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob

COOKING ADVICES

Pan quality

Adapted materials: steel, enamelled steel, cast iron, ferromagnetique stainless-steel,
aluminium with ferromagnetique bottom.
Not adapted materials: aluminium and stainless-steel without ferromagnetique bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ] and [ + ]
at front right *
Press on key [ + ]
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ] and [ + ]
at front right *
Press on key [ - ]
19
Display
[ 0 ] or [ H ] on 4 displays
No modification
[ L ] on 4 displays
Display
[ L ] on 4 displays
[ 0 ] or [ H ] on 4 displays
No light on the displays