Technical Specification - miniland baby ambi care Manual Del Usuario

Installation/removal of battery
This product uses an AAA 1.5V battery, use the following procedure to replace
or insert battery.
1. Open the battery cover following the direction of the arrow
2. Put the battery into the battery compartment following the "+" "-"symbols.
3. Close the battery cover
6. MAINTENANCE
1. Please place in draught to measure accuracy.
2. Prevent the product getting wet, if it does get wet please dry and corrosive
liquids can damage it.
3. Please use and preserve at a normal temperature, the product life will be
shortened if temperatures are too high and too low.
4. Operate carefully. If it is dropped or knocked, the screen will be damaged
and the humidity will not work normally.

7. TECHNICAL SPECIFICATION

- Working temperature: 0
- Range of readings : -50 ºC to 70 ºC (-58 ºF to+158 Fº)
- Range of humidity readings: 10% RH - 99% RH
- Precision of temperature reading: ±1.0 ºC
- Temperature resolution : 0.1 ºC (0.2 ºF)
- Period of temperature register : 10 seconds
- Precision of Humidity reading: ±5%
- Humidity resolution: 1%
- Dimension：110 x 100 x 20mm
8. BATTERY & PRODUCT DISPOSAL INFORMATION
· Remember to remove the battery when you dispose of the thermo-hygrometer
and dispose of it responsibly.
· Do not mix products bearing the crossed out bin symbol with your general
household waste.
· For the correct collection and treatment of these products take them to the
collection points designated by your local authority. Alternatively contact the
retailer who sold you the product.
～50 。
ºC ºC