Settings And Configuring The Mobilelite Wireless G2 - Kingston Technology MLWG2 Manual Del Usuario

Settings and Configuring the MobileLite Wireless G2

Using the Kingston MobileLite App, you can customise the wireless network settings for MobileLite Wireless G2. If
you did not make any changes during the initial setup, the default settings are: Name: MLWG2-XXXX, Auto
Shutdown: Off, Visibility Status: ON, Wireless Channel: 11 and Security (WPA2): Off.
To access the MobileLite Wireless G2 Network Settings, please follow these steps:
1. From the „Homescreen', select 'Menu'
2. Select „Settings'
Name – commonly referred to as an SSID, or Service
Set Identifier, this field allows you to specify a device
name (between 1 and 32 characters) that will broadcast
in the list of available wireless networks
iPhone or iPod touch device.
MLWG2-XXXX, as seen in Figure 18.1
Battery Life - indicates amount of charge left in battery
Auto Shutdown – if enabled, the MLWG2 will
automatically shut down at the selected time given. (30
minutes – 5 hours)
Firmware – MLWG2 device firmware
Visibility – this gives you the option to hide or unhide
the SSID specified in the „Name‟ field. By default, the
visibility status is turned „ON‟. If you wish to turn this
feature „OFF‟, the device name will NOT be broadcast
in the list of available wireless networks on your iPad,
iPhone or iPod touch device. However, you can still join
the Wi-Fi network by entering the device name manually
using the menu option, „Other...‟.
Wireless Channel – this setting allows you to select a
specific frequency channel used to communicate with
other devices on your wireless network. The default
setting is Channel 11 (2.462 GHz.)
Security (WPA2)
unauthorised access to your MobileLite Wireless G2
device by prompting users for a password. Simply enter
a password in the 'Password' field, confirm it by re-typing
it in the 'Confirm Password' field and tap the 'Done'
button to save the MobileLite Wireless G2 settings.
1
I
f the visibility status has been turned off, you can still join the MobileLite Wireless G2 network by entering the SSID manually on your iPad,
iPhone or iPod touch, as long as you know the 'Name' (SSID). Please note that a password will be required if the security option is enabled.
Document No. 480-16FUM-001.A00
.
.
on your iPad,
The default name is
.
–
this option helps
Kingston MobileLite Wireless G2
1
Figure 18.1 – MobileLite G2 wireless network
prevent
settings
Page 18 of 21