Federal Signal Streamline LP3 Serie Instrucciones De Instalación Y Servicio página 2

It is important to follow all instructions shipped with this product. This device is
to be installed by a trained electrician who is thoroughly familiar with the National Electric
Code/Canadian Electric Code and will follow the NEC/CEC Guidelines as well as local codes.
The selection of mounting location for the device, its controls and the routing of
the wiring is to be accomplished under the direction of the facilities engineer and the
safety engineer. In addition, listed below are some other important safety instructions and
precautions you should follow:
• Read and understand all instructions before installing or operating this
equipment.
• Disconnect light from the power supply before any installation or maintenance is
performed.
• After installation, test the light system to ensure that it is operating properly.
• Never alter the unit in any manner. Safety may be endangered if additional
openings or other alterations are made to the units.
• After testing is complete, provide a copy of this instruction sheet to all operating
personnel.
• Establish a procedure to routinely check the light installation for integrity and
proper operation.
• The product nameplate, which may contain cautionary or other information of
importance to maintenance personnel, should not be obscured in any way.
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
I. INSTALLATION.
A. Unpacking.
After unpacking the light, examine it for damage that may have occurred in transit.
If the equipment has been damaged, do not attempt to install or operate it. File a claim
immediately with the carrier stating the extent of the damage. Carefully check all envelopes,
shipping labels, shipping labels and tags before removing or destroying them.
B. Mounting.
1. Pipe Mounting (LP3PL).
Model LP3PL lights are to be installed on 1/2" NPT pipe. If 3/4" NPT pipe is used,
a user-supplied reducer and pipe nipple are required.
INSTALLATION AND SERVICE INSTRUCTIONS
STREAMLINE
SAFETY MESSAGE TO INSTALLERS,
USERS AND MAINTENANCE PERSONNEL
FOR
LP3 LED LIGHTS
®
-1-