Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TO REPLACE
DUST BIN
Turn
This Direction
Open
To Close For Use
(For Emptying)
Closed
(For Use)
Replace dust bin lid assembly by placing
back on dust bin with the marks on the lid
aligned as shown under Open (For
Emptying)
on the back of the dust bin°
Rotate lid clockwise
while pressing down-
ward so marks align as shown above Close
(For Use) as above°
Place dust bin
back into vacuum
cleaner by insert-
ing the bottom first
and tilt back with
the dust bin han-
dle raised.
Handle
Dust
Bin
*-
Lower the dust
bin handle to lock
dust bin in place,
Check secondary
filter frequently
and clean
when dirty°
WARNING
Electrical Shock Hazard
Do not operate the cleaner without
the motor
safety filter. Be sure the
filter
is properly
installed
to prevent
motor
failure
and/or
electrical
shock.
Always
unplug power cord from
electrical
outlet before
performing
any service
on vacuum.
SECONDARY FILTER
FOAM
Remove the dust bin as outlined in the
DUST BIN CLEANING
section,,
Remove secondary filter from vacuum
cleaner,.
Secondar/
Filter---_
(
Wash the secondary
filter in warm soapy
water, rinse and dry thoroughly
by squeez-
ing the filter in your hand and letting it air
dry,
DO NOT wash in the dishwasher.
DO NOT install
damp.
Replace dry secondary
filter, Ensure filter is
properly
installed over filter opening
Replace the dust bin as outined in the
DUST BIN CLEANING
section.
16
Tabla de contenido
