Software Installation Procedure - LevelOne Printer Server Serie Guía De Instalación Rápida

English
1.1 Hardware Installation Procedure
1. Unpack the printer server package and verify that all the items listed on the sleeve are
provided.
2 Connect the printer server to the printer you want to share on the network.
3 Connect the printer server to your network by attached the network cable to the UTP port
of the printer server.
4. Connect the power adapter to the printer server. The printer server will perform the
Power-On-Self-Test (POST) after it is powered on. During the POST, the Status and
Ready LEDs will be on. When the LEDs are unlighted, the printer server is ready.
Note: You must use the power adapter shipped along with the printer server, do NOT
use any other power adapter from other sources.
1.2

Software Installation Procedure

1. Insert the printer server CD into your CD-ROM drive. The Autorun.exe program should be
executed automatically. If not, run Autorun.exe manually from CD-ROM drive's root
directory.
2. The "Installation Manager" will be displayed on the screen as following. Select model then
click "Administrator Installation" (Figure 1-1)
3. The "Utilities Setup" window will be displayed. Click "Next" (Figure 1-2)
4. Click "Next" to install the utilities in the default folder or click "Browse" to specify the
destination folder where you would like to install the utilities (Figure 1-3)
5. Select the components you want to install. It is highly recommended to install all provided
components. Click "Next" to continue (Figure 1-4)