Safety Instructions - Ibx WB-T Manual De Usuario

1. Safety Instructions

Connect the device to an earthed socket to ensure the safety of the machine
and the experiment. Make sure the voltage is the same as required by the
device.
The use of this instrument in flammable, explosive, poisonous, or highly
corrosive environments or with hazardous substances is forbidden.
Place the incubator on a horizontal, flat, clean, non-slip and stable surface.
Adjust the feet so that the device is leveled.
This item must only be used by qualified staff that has read the instructions
manual and knows how to operate it.
Do not place the device near any heat source. Keep away from high
magnetic fields. Do not put volatile, flammable and explosive materials in
the machine, otherwise it could cause an explosion or a fire.
Non-professionals must not disassemble or repair this machine.
Read the instructions manual before using this device.
• When working, wear the necessary personal protective equipment to avoid the risk of:
- Burns caused by contact with hot surfaces or materials
- Burns caused by splashing and evaporation of liquids
- Intoxication caused by release of toxic or flammable gases.
• Set up the instrument on a spacious, stable, clean, non-slip, dry, and fireproof surface that can
support the weight of the equipment. Do not operate the instrument in explosive atmospheres
or with hazardous substances.
• During use, do not touch the heating pipe with your hands as it could cause burns.
• The temperature must be set at least 25ºC below the flash point of the substances used.
• Process pathogenic materials only in closed vessels.
• Beware of hazards due to:
Flammable materials or media with a low boiling temperature
-
Overfilling of the vessel
-
Unsafe vessels
-
• The instrument can only be disconnected from the main power supply by pulling from the plug,
not the cable.
3