8x 10/100 Mbps
UNMANAGED L2 ETHERNET SWITCH
Ref. 768101
Art.Nr.SWUM-100-8
Package content
•
8x 10/100 Mbps Unmanaged L2 Ethernet Switch.
•
Power supply.
•
Quick installation guide.
Product description
The 8 port unmanaged L2 Ethernet switch was designed
for a network environment where the tra c and number
of users increases continuously.
This device has multiple applications, being ideal for
shared bandwidth workgroups with multiple high-speed
servers, providing speeds of up to 200 Mbps (100 Mbps
Full-Duplex mode).
Each port can provide to the workstation an uncongested
bandwidth for simultaneous server accesses.
The switch is a perfect choice for a 10 Mbps network
section which could be updated to Fast Ethernet in the
future, so Ethernet workgroups can connect to the switch
and change adapters or hubs anytime later without
changing the switch or recon guring the network.
Main Features
•
Plug & Play.
•
8 10/100 Mbps Auto-Negotiation RJ45 ports.
•
Compliant with IEEE 802.3 (10Base-T), IEEE 802.3u
(100Base-TX) standards.
•
1.6 Gbps switching capacity.
•
Full/Half-Duplex capacity on each interface port.
•
CSMA/CD protocols supported.
•
IEEE 802.3x Flow Control protocol supported in
Full-Duplex mode, which ensures stable connections
ON
Link/Act.
between di erent speed standards.
•
MDIX function, allows automatic exchange of TX/RX.
•
Supports 2K MAC address tables.
•
LED indicators for management and diagnosis.
Standards
•
IEEE 802.3 10Base-T.
•
IEEE 802.3u 100Base-TX
•
IEEE 802.3x Flow Control.
•
IEEE 802.3 Nway: Auto-Negotiation.
Working environment
Temperature
•
Operation temperature: 0ºC - 40ºC.
•
Storage temperature: -40ºC - 70ºC.
Humidity
•
Non-condensing operation humidity: 10 - 85%.
•
Non-condensing storage humidity: 5 - 90%.
Power
•
Power values: 100 - 240 V~ 50 - 60 Hz.
•
Working values: 5V , 1A.
LED indicators
LED indicators allow both monitoring and diagnosing
the status of the switch. The function of each indicator is
detailed below:
•
Power LED: this indicator lights solid blue when
the switch is turned on. If the LED does not light, it is
necessary to check the power connection.
•
Link/Active LED: this indicator lights solid blue when
the corresponding port is connected to a network. Blinks
blue when transmitting or receiving network data.
