SNOWJOE Sunjoe 24V-ST14 Manual Del Operador página 10

2. Slide the auxiliary handle onto the base plate. Make sure
the tabs on both sides of the auxiliary handle slide into the
slots on the base plate. Push until it clicks into position
(Fig. 10).
Base plate
Fig. 10
Slot Tab
3. Adjust the auxiliary handle to a comfortable working
position. Lock the auxiliary handle by flipping the handle
lock down (Fig. 11).
Fig. 11
Flip down
to lock
Auxiliary
handle lock
Operation
Starting + Stopping
Before you start the unit, make sure the trimmer is not
contacting with any object.
1. Slide the battery pack in the battery compartment until it
snaps into position (Fig. 12).
IMPORTANT! Make sure that the battery pack is secured
to the tool before beginning operation.
Fig. 12
Battery pack
Battery compartment
2. To turn the trimmer + edger ON, press and hold the safety
lock button with your thumb, then squeeze the ON/OFF
trigger switch with your fingers. Once the machine powers
on, you can release the safety lock button and proceed
with operation (Fig. 13).
Fig. 13
Auxiliary
handle
Trigger switch
Safety lock button
3. To switch OFF, release the trigger switch. Remove the
battery from the battery compartment (Fig. 13).
m
WARNING!
trimmer + edger during work breaks and after finishing work.
Telescoping Pole Adjustment
1. Disconnect the trimmer + edger by removing the battery
pack.
2. Turn the telescoping locking coupler clockwise to unlock
the telescoping pole (Fig. 14).
Fig. 14
10
Always remove the battery pack from the
Telescoping
locking coupler