Idiomas disponibles
Idiomas disponibles
V.35/X.21 BI-DIRECTIONAL INTERFACE CONVERTER
Choose a location so that you can
connect the devices directly to the
converter. The units are designed
to operate over short distances. We
do not recommend attaching
additional cables to the ends of the
converter.
Connect the power supply into
the base of the unit and then into
the wall outlet.
Bridge
8
3. Installation
X.21
DB15
Fig. 3-1. Typical Application.
Connect the M34/V.35 DTE
connector directly to the DCE
equipment. Connect the
DB15/X.21 connector directly to
the DTE equipment.
There are no internal jumpers or
switch setting to configure. The
converter is transparent to baud
rate and protocol and contains only
passive components.
A typical application appears in
Fig. 3-1 .
Base
of Unit
V.35 CSU/DSU
V.35
M/34
