Installing The 2.5-Inch Hard-Disk Drive Bracket - Dell OptiPlex 7080 Manual De Servicio

3. Remove the 2.5-inch primary hard-disk drive
About this task
The following images indicate the location of the hard-disk drive bracket and provide a visual representation of the removal procedure.
Steps
1. Pull one side of the hard-disk drive bracket to disengage the pins on the bracket from the slots on the drive.
2. Lift the hard-disk drive out of the bracket.
NOTE: Note the orientation or the SATA connector marking on the hard-disk drive so that you can replace it
correctly.

Installing the 2.5-inch hard-disk drive bracket

Prerequisites
Si va a reemplazar un componente, quite el componente existente antes de realizar el procedimiento de instalación.
About this task
The following image indicates the location of the 2.5-inch hard-disk drive bracket and provides a visual representation of the installation
procedure.
or 2.5-inch secondary hard-disk drive.
Desmontaje y reensamblaje 25