Installing Battery - Peg-Perego FIUS1201G169 Manual Del Usuario

59 • If you have bought or own a Peg Perego 12V/12Ah battery, you will have to remove the plastic filler (A) by slipping it off the battery clamp.
60 • Reposition the new battery with the battery clamp in its housing. Fasten the clamp with the two screws.
61 • Connect the battery plugs to the electrical system. Reposition the hood. Attention: always screw the two safety screws back onto the sides of the hood.
DON'T STOP THE FUN: purchase a spare battery to have a freshly charged back-up available.
For your child's safety: please read and follow all instructions below before operating.
• ATTENTION:
Check the fastening retainers to be sure they are tight.
• 1st SPEED slow speed (beginner drivers):
With both hands on the steering wheel, press down on the accelerator pedal; the vehicle goes forward at 2
• 2nd SPEED: fast speed (experienced drivers):
With both hands on steering wheel press down on the accelerator pedal; the vehicle goes forward at 4
• REVERSE:
Place the left hand on steering wheel. With the right hand holding the gearshift in reverse, press your foot down on
the accelerator; the vehicle reverses at 2
• BRAKE:
The electric braking system stops the vehicle automatically when your child lifts his foot off the pedal.
Teach your child the proper use of this vehicle for a safe and fun play time.
• Before starting be sure that the way is free from people and objects.
• Drive with both hands steering wheel and keep your eyes on the road at all times.
• Please teach your child to stop in time to avoid running into objects or people and to immediately release the
accelerator pedal if they do run into an object or person.
CAUTION:
• If the vehicle is overloaded, as can happen on soft sand, mud, or very uneven ground, the overload
switch will immediately disconnect the power. The power supply will be restored after a few
seconds.

INSTALLING BATTERY

RULES FOR SAFETY DRIVING
1
/ mph. (Reverse is spring-loaded for safety).
4
1
/ mph.
4
1
/ mph.
2