Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
Switch machine on at the On/Off switch (1).
Insert the paper to be perforated between the two lateral stops (5) and fix
in position using knurled screw (6).
Push paper drill through the pile with an even movement and move up
again. Do not leave drill in the paper an unnecessarily long time, or it may
overheat.
Faults
Fault
Machine not running:
Ragged holes:
Hand lever hard to move,
drills break:
Drills block,
drills squeak:
Bottom sheets not perforated:
If faults are not eliminated by these instructions, please contact your Nagel
dealer.
Technical data
Noise emission:
Power supply:
Drill diameter:
1 Max. pile depth: 50 mm
2
< 70 dB (A)
see rating plate
2 - 9 mm
Remedy
Plug in mains plug,
switch on main switch
Replace blunt drill,
replace drilling base
Replace blunt drill,
replace drilling base
Perforate waxed paper
Adjust drilling depth downwards
19
Tabla de contenido
