Tabla de contenido
X218WFD
3.1.2 X212AFD como fuente lineal y X218WFD como refuerzo de bajas
frecuencias en suelo (límite de uso del subwoofer 80 Hz).
El X218WFD aporta una extensión de bajas frecuencias hasta 25 Hz. El sistema
operará entre 25 Hz – 18 kHz, -10dB.
Modelo: X212AFD
Preset: [HPF80 FLAT]
Modelo: X218WFD
Preset: [LPF80 X212]
The minimum number of cabinets to be used as a line source system is 6
cabinets. We do not recommended to use less than 6 cabinets per side.
The optimum number of cabinets per side would be from 8-9 cabinets to
up.
Place the subwoofers side by side. If not possible, the maximum distance
between two adjacent acoustic centres must be 2.1m when the upper
frequency limit of the subwoofer is at 80 Hz.
SYSTEM ALIGNMENT
The system is pre-aligned from the factory. Do not forget to add the
geometric delay depending on the configuration used.
8
[HPF80 FLAT]
[LPF80 X212]
July 2021
Amate Audio
Tabla de contenido
