Connection To An External Control Device - Marantz MM8077 El Manual Del Propietario

ENGLISH

Connection to an external control device

q
Flasher input connector (FLASHER IN)
Used when connecting a control box or other
control device to this unit, and using such a
device to control this unit.
w
DC control output connector
(DC CONTROL OUT)
Used when connecting a device that has a DC
control input terminal to this unit, and linking
the power ON/STANDBY function of this device
with the power ON/STANDBY of the connected
device.
An electrical signal of max 12 V/44 mA is output
from the DC control output terminal.
For details, see the instruction manual of the
connected device.
NOTE
• Do not use the DC control output terminal as
the power supply for an external device.
• When using this unit with a device connected
to the DC control connector, set the auto
standby function to "Off" (vpage 9
"Setting the power to standby automatically
(Auto standby function)").
8
q w e r
e
DC control input connector
(DC CONTROL IN)
Used when connecting a unit that has a DC
control input terminal to this device, and linking
the power ON/STANDBY of the connected
device with the power ON/STANDBY of this
unit.
For details, see the instruction manual of the
connected device.
NOTE
• When a 5 V – 15 V voltage is input to the DC
control input terminal, the power of this unit
switches ON.
However, inputting voltage outside of this
range will cause damage to this unit.
• When using this unit with a device connected
to the DC control connector, set the auto
standby function to "Off" (vpage 9
"Setting the power to standby automatically
(Auto standby function)").
r
Remote control connector
Used when connecting an external control
device to this unit, and using the device to
control this unit.
NOTE
When connecting a marantz AV8801 or AV7701
AV pre-tuner, you can switch the power of this
unit to ON/STANDBY together with the AV8801/
AV7701 power supply.
For details, see the AV8801 or AV7701 owner's
manual.