Precautions - OKU OKUFULL07 Manual De Usuario E Instalacion

C. Make sure that the main machine power switch is off;
D. Check the temperature setting;
E. Check the air inlet and outlet.
Trial
2.
A. The user must "Start the Pump before the Machine, and Turn off the Machine
before the Pump", or the machine will be damaged;
B. The user should start the pump, check for any leakage of water; and then set
suitable temperature in the thermostat, and then switch on power supply;
C. In order to protect the swimming pool heater, the machine is equipped with a
time lag starting function, when starting the machine, the blower will run 1
minutes earlier than the compressor;
D. After the swimming pool heater starts up, check for any abnormal noise from
the machine.
IX. Precautions
Attention
1.
A. Set proper temperature in order to get comfortable water temperature to avoid
overheating or overcooling;
B. Please don't stack substances that can block air flow near inlet or outlet area, or
the efficiency of the heater will be reduced or even stopped;
C. Please don't put hands into outlet of the swimming pool heater, and don't
remove the screen of the fan at any time;
15