Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE AND CARE OF THE ELECTRIC TOOL
• Do not use the tool when apply force. Use the correct electric tool for your application. The correct electric
tool completes the task better and safety at the speed for which it has been developed for.
• Do not use the electric tool if the ON / OFF switch does not function. Any electric tool that cannot be
operated using the switch is dangerous and must be repaired.
• Pull the plug out of the socket and / or remove the rechargeable battery from the electric tool before
carrying out ans´y settings, changing any accessory parts or when storing the electric tool. Such
preventive safety measures reduce the risk of the electric tool starting accidentally.
• Keep the unused electric tool out of reach of children and do not allow persons to use the electric tool that
are not familiar with the electric tool or its instructions. Electric tools are dangerous for inexperienced
users.
• Check the electric tool. Check if moving parts have seized, if parts are damaged or if other conditions are
present which could impair the use of the electric tool. If the electric tool is damaged, have it repaired
before use. Many accidents are caused by poorly maintained electric tools.
• Use the electric tool, accessories, insertion tools, etc. in accordance with these instructions and in doing
so, consider the working conditions and the work to be carried out. The use of the electric tools for
procedures other than those intended may lead to dangerous situations.
• Charge the rechargeable battery only using a charger specified by the manufacturer. A charger which is
suitable for a rechargeable battery type may represent a fire risk when using another rechargeable
battery.
• Use the electric tool only with the rechargeable battery especially intended for this purpose. The use of
another rechargeable battery may lead to injuries or fires.
• When the rechargeable battery is not being used, keep it away from metal objects as a connection may
be established from one connection to another, such as paper-clips, coin bowls, nails, screws or other
small metal objects.
•
Fluid may leak from the rechargeable battery caused by misuse or other circumstances. Avoid contact
with the fluid. In event of eye contact, this must be rinsed out with plenty of water. We also recommend
that you seek medical attention. Fluid leaking from the rechargeable battery may lead to irritations and
burns.
SAFETY INSTRUCTIONS FOR THE BATTERY AND CHARGER
• Before using the charger, read all instructions and warning signs on the charger, the rechargeable battery
and the product where the rechargeable battery is going to be used.
• The charger is exclusively intended for charging rechargeable batteries. Every other use may lead to fire,
electric shock and other injuries.
• Do not put any objects on the charger and do not place the charger on soft surfaces as this may lead to
heating inside. Install the charger at a distance from heat sources.
• To reduce the risk of damaging the mains connector and the power cable, pull out on the plug and not on
the cable when disconnecting the charger.
• Make sure that the cable is neither walked on, tripped over or damaged or loaded in any other manner.
• An extension cable should only be used if absolutely necessary. The use of an incorrect extension cable
may lead to fire, electric shock or other injuries.
• Do not operate the charger if it has been exposed to strong impacts, has been dropped or damaged in
any other manner. Have it checked by an electrician or a company that repairs electric tools.
• Do not dismantle the charger. Take it to an electrician or a company that repairs electric tools.if it has to
be maintained or repaired. Incorrect assembly may lead to fire, electric shock and other injuries.
• To reduce the risk of an electric shock, remove the charger from the socket before starting with cleaning.
This risk is not reduced alone by removing the rechargeable batteries.
• Never attempt to connect two chargers with each other.
•
Do not store or use the tool and the rechargeable battery at temperatures of 40°C or higher (e.g. In sheds
or metal buildings in the summer time).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
