Important Safeguards - Redmond RBQ-0252-E Manual Del Usuario

Ocultar thumbs Ver también para RBQ-0252-E:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Read the user manual carefully and keep it as a reference book. Proper use of the ap-
pliance will significantly prolong its life.

IMPORTANT SAFEGUARDS

• The manufacturer is not responsible for any failures
arising from the use of this product in a manner in-
consistent with the technical or safety standards.
• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast type
environments.
• Before installing the appliance, check that the device
voltage corresponds with the supply voltage in your
home (refer to rating plate or technical data).
• While using the extension cord, make sure that its
voltage is the same as specified on the device. Using
different voltage may result in a fire or other accident,
causing appliance damage or short circuit.
4
• Use only earthed electric sockets as this is an obliga-
tory safety requirement. Use an earthed extension
cord as well.
• Always unplug the device after use, before cleaning
or moving. Never handle the plug with wet hands. Do
not pull the power cord to disconnect from the outlet;
instead, grasp the plug and pull to disconnect.
• Keep the power cord away from hot surfaces (gas or
electric ovens) or sharp edges. Do not let the cord
hang over edge of a table or a counter.
REMEMBER: damaging the cord may lead to a
failure that will not be covered by the warranty.
If the cable is damaged or requires replacing,
contact an authorized service center only to
avoid all risks.
• Never place the device on soft surfaces to keep ven-
tilation slots clear of any obstruction.
• During use the appliance becomes hot! Care should
be taken to avoid touching the housing, or any other
Tabla de contenido
loading

Tabla de contenido