Reese M5 MY20 GM LEG Instrucciones De Producto página 5

FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
7. Due to variations in truck underbeds, it is normal for some handles to be loose and other handles to be too tight to lock. If a
handle appears too loose and rattles or cannot be closed fully, remove the lynch pin and adjust castle nut by hand to a
position where handle does not rattle or is able to close.
8. Once handle adjustment is satisfactory, re-insert lynch pin and close properly.
9. With Leg T-Pin handles locked and T-Pins securely held in underbed structure, tighten each M16 hex-head bolt to 220 ft-lb
of torque.
10. Verify that hitch is tight to truck bed by lifting each side of the hitch.
11. Assemble head to center section per instructions included with M5 Center Section and Head.
©
2020 Horizon Global America Inc.
Product Instructions
M5 MY20 GM LEG
Page 5 of 21
Lynch pin
(shown Closed)
Finger tighten castle nut only!
30937N 05/08/2020
Part Number:
30937
Rev. A