Tabla de contenido
9
TERMOLOGGER USB-THR
STATUS INDICATION
LED
Green triple flash
Indicators
Logger full, no alarm on the channel
Red triple flash
Logger full, alarm on the channel
Green double flash
Delayed start
Green single flash
Logging, no alarm
Red single flash
Logging, low alarm on the channel
Red double flash
Logging, high alarm on the channel
Green LED/Red
No LEDs flash
Logger stopped or battery empty
EN
LCD Indicators
Maximum logged
value symbol
Negative
symbol
Minimum logged
Reading
value symbol
The TERMOLOGGER USB-THR features a high contrast
LCD and two bi-colour LEDs. The LCD shows the latest
logged reading, maximum, minimum and supplementary
details on the logger status (see table opposite).
Display
Relative Humidity
scale
Temperature
scale
*If the logger is set to 'LCD off' or 'LCD on for 30 seconds' mode, then this will only be shown after
the button is pressed. Otherwise the display will remain blank.
Logger status
Explanation
Delayed Start
This is shown when the logger is set to
start at a specific date and time *
This is shown when the logger is setup for
Push to Start
'push to start' logging
This is shown when the logger is running
Logging
in 'LCD off' mode, and the button is
pressed. The display clears again after
three seconds
Stopped
If the logger has not been set to log and
the button is pressed, three dashes are
displayed for three seconds
10
Tabla de contenido
