Powerplay BLACK Serie Instrucciones De Uso, Cuidado Y Montaje página 13

Operating Instructions
Using the Black Spray Tip
1. Fill on board detergent tank with a properly
formulated detergent to water ratio.
2. Attach black spray tip (K1) to the end of the lance (J).
3. Begin pressure washing desired area.
4. When finished applying detergent, remove excess
detergent from the on board tank and run one tank of
clear water using the low pressure black spray tip to
thoroughly clean all excess detergent out.
5. To go back to clear water, remove black spray tip and
attach a high pressure nozzle (green, yellow, or red).
NOTE: This system applies detergent under low pressure
using the black spray tip (K1) only. The cleaning power
of the detergent is enhanced when applied with low
pressure and enough time is given to break down dirt
and grime.
Using the Foam Cannon
1. Unscrew fluid tank from foam cannon valve assembly.
2. Fill fluid tank with water (for best results, use warm
water.)
3. Add 1-3 ounces of your favorite detergent to the fluid
tank.
4. Attach fluid tank to foam cannon valve and attach
assembly to the gun. Use the control knob to change the
flow of soap + (more) or - (less).
5. When finished, run clean plain water through the
pressurized foaming system to purge soap from the
internal components.
Flush with hot water for added cleansing power.
NOTE: Do not over tighten foam cannon valve.
12