Tabla de contenido
English
Before you begin
Ensure the area where you install and use the ERS 5600 Series switch
meets the following environmental requirements:
•
•
•
•
•
•
•
•
If you are installing a single Nortel Ethernet Routing Switch on a table or
shelf, ensure the surface can support at least 21 to 31 pounds (9.5 to 14
kilograms).
Installing the switch on a table or shelf
You can install a single Nortel Ethernet Routing Switch on any flat surface
that can safely support the weight of the switch and attached cables (21 to
31 pounds or 9.5 to 14 kilograms).
The following figures provide instructions for installing the switch on a table
or shelf.
Nortel Ethernet Routing Switch 5600 Series Regulatory Information
Copyright © 2007, Nortel Networks
.
Ambient temperature between 32 and 106 F (0 and 50 C)
Relative humidity between 10% and 90% noncondensing
No nearby heat sources such as hot air vents or direct sunlight
No nearby sources of severe electromagnetic noise
No excessive dust
Adequate power source within six feet; one circuit required for each
power supply (see table, AC and DC power specifications)
At least 2 inches (5.08 cm) on each side of the switch unit for ventilation
Adequate space at the front and rear of the switch for access to cables
Nortel Ethernet Routing Switch 5600 Series
NN47201-101 01.02 Preliminary
6.0 16 January 2008
13
Tabla de contenido
