Adjustment And Operation - Gima N-126 Manual Del Usuario

3.2 Adjustment and Operation

Brightness Adjustment (fig. 12-13)
1. Connect the power cord and set the main switch 1 to " – "state (ON).
2. Turning the brightness adjustment knob 2.
fig. 12
Placing the Specimen (fig. 14)
1. Place the specimen the center of the mechanical stage and use the stage clips to clamp it.
2. Turn the portrait and lateral adjustment knob 1 of the mechanical ruler, move the specimen to the
required position.
• Be careful when changing the objective. If you finish the observation with the short working distance
objective, and want to change another one, becareful of not letting the objective touch the specimen.
1
fig. 14
Focusing the Specimen (fig. 15)
1. Focus the specimen with 10x objective. To avoid the objective touching the specimen during focus-
ing, you should raise the mechanical stage to let the specimen close to the objective at first, then
slowly separate them to bring the specimen to focus.
Turn the coarse focus knob 1 conversely to lower the specimen and search images in the 10×ocular
simultaneously, and then use the fine knob 2 to focus. After that, you can replace with other magnifi-
cation objectives safely, and focus without the risk of damaging the specimen.
• To make the observation more convenient, you can use the locking set 3 to fix the stage in a vertical
direction.
ENGLISH
1 2
fig. 13
2 1
fig. 15
3
22