Idiomas disponibles
Idiomas disponibles
CAUTION:
•DO NOT USE WITH DIMMERS
•RISK OF ELECTRIC SHOCK - DO NOT DISASSEMBLE
•NOT FOR EMERGENCY LIGHTING
Installation Instructions
Setting up your Smartsense Bulb
Make sure the power to the socket is off.
Open the "Settings" cover on the side of the bulb using a Phillips' head
screwdriver (3.0-3.8 mm recommended). Do not open cover while bulb
is twisting into the socket.
Twist the knob to your preferred tie setting (1.5, 3, 6, or 15 minutes). This
3
is how long your Smartsense bulb will remain lit after motion is no
longer detected.
4
Choose whether you want Smartsense to turn on during the day by
sliding the toggle to Daytime ON (Smartsense will turn on when
detecting movement 24 hours a day) or Daytime OFF (Smartsense will
only turn on when detecting movement after dark).
5
Twist the Smartsense bulb into your existing floodlight fixture. Switch
the bulb on and off as normal.*
Smartsense requires constant power to operate. Smartsense will not
function properly if blocked or placed behind glass, plexiglass, or acrylic.
