Scope Of Delivery - Kaco blueplanet 87.0-165TL3 Instrucciones De Instalación

1 Replacing the AC input plate
Fig. 1: Localising the AC input plate
1 1-row input plate [1st option]
2 2-row input plate [2nd option]

Scope of delivery

ž 1 AC-side input plate and 1 seal (replacement)
ž Installation manual [multi-language]
Installing the input plate
↻ Lack of current and voltage ensured on the device.
1 Unfasten the existing input plate on the device using the 6 screws and place it
back in the inverter packaging [
NOTE: Check the seal for the input plate on the device. In case of damage, re-
move the seal and completely remove adhesive residue.
2 Remove the adhesive tape from the seal provided and stick the seal over the
pin lock onto the AC input opening.
3 Feed the AC cables into the input plate provided [option 1 or 2].
4 Secure the input plate by tightening the screws in a diagonally opposite se-
quence [ T_25 /
5 Option 1: Tighten the cable screw fitting [ W_68/
6 Option 2: Tighten the cable screw fitting [
» Assembly complete.
AC input plate on blueplanet 87.0-165TL3
Z
Fig. 2: Replacing the AC input plate
3
4
T_25]
4.8 Nm]
3
2
1
Seal
Fastening screws
20 Nm] [ W_36/
W_46/ 10 Nm]
4
4 Nm]
Page 3