Installation Below A Countertop - Monogram ZKW700S Manual Del Usuario

INSTALLATION BELOW A COUNTERTOP

Install 2x4 or 2x2
From Floor to Bottom
Electrical
of Block
Outlet 16"
Max. From
Left Side
nearly flush with adjacent cabinetry doors.
the opening.
cabinet frame.
from floor to bottom of cutout is recommended for
under countertop installation.
Installation below a cooktop:
Warming drawers are approved for installation below
only certain specified cooktop models. See the label
attached to the top of the warming drawer for approved
models. A solid barrier and air gap between cooktop and
warming drawer is required. See NOTE above.
6
Installation Preparation
Electrical Outlet 42"
Electrical Outlet
Max. From Right Side
Flush With Side of
Install a Solid Barrier
Below a Cooktop
A
Solid Barrier
1/4"
Air
Gap
Install a Solid Barrier
and a 1/4" Air Gap
Above Warming Drawer
25"
See Note
1" Min.*
Countertop
Height
*NOTE: When installing the warming drawer below a
cooktop, a solid barrier must be installed at least 1" from
the lowest point of the bottom of cooktop burner box to
thick plywood. Allow at least 1/4" air gap between the
barrier and the top of the warming drawer. See label on
top of the warming drawer for approved cooktop models.
Installation below a cabinet drawer:
The warming drawer may be installed beneath a cabinet
drawer. In this installation, a solid barrier should be
installed above the warming drawer to block access.
at least 1/4" air gap between the barrier and the top of
the warming drawer. Observe the 5" min. above the floor
or 1" above the toekick minimum installation height.
NOTE: If you are installing in frameless cabinets, it may
be necessary to install 1/2" wide cleats to accept drawer
mounting screws. See drawer to find exact locations of
mounting screws.
Side to Side Installation:
Install two warming drawers in separate cutouts.
Allow 2" min. between cutouts.
Side to Side Installation
36"
Dimensions
Models A
2"
Min.
31-2000654 Rev. 3