Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Before using your new battery charger, read carefully this User's manual.
Do not use or store the equipment near wet places. May cause malfunction or shock
hazard.
Clean only with a soft, dry cloth.
Do not drop or hit the equipment, may cause damages.
Charge 2/4 AA or AAA batteries.
Capacity to charge one 9V battery.
Time to charge: 6 hours.
NiMH & NiCd batteries.
1. Select the battery type, move the switch and select NiMH or NiCd.
2. Place two AA batteries to the front and/or to
the back.
3. Pay attention to polarity.
5. If you wish to recharge a 9V battery just place
it on the connector, pay attention to polarity.
7. Connect the charger to an available outlet.
8. The "Front" LED indicator will light up in case that the batteries are been charged on the
front of the charger, or the "Rear" LED indicator will light up in case that the batteries are
been charged on the back of the charger.
9. The charge time is 6 hours, once completed the batteries loading time, disconnect the
charger from the outlet and remove the batteries.
You should place the batteries in pairs otherway the charger will not charge the
batteries.
The LED indicators will always be light up while the charger has batteries and it is
connected to an outlet.
Important
Highlights
Operation
4. If you want to place AAA batteries down the
integrated adapter.
6. Down the foldable plug.
Charging time batteries
Battery type
Normal charge
300 mAh
AAA - 1.2 Vcc
1100 mAh
2100 mAh
AA - 1.2 Vcc
700 mAh
170 mAh
9 Vcc
200 mAh
Special considerations
Avoid charge the batteries with inverse polarity of the charger.
Never charge batteries with different capacities at the same time even though they are
the same type (AA or AAA).
For new batteries, 2 or 3 charge and discharge at 100% cycles are necessary to optimize
the functioning of the batteries.
If the batteries are stored for more than a week, always recharge the batteries before use.
Specifications
Input:
120V~ 60Hz 4W
Output:
2x (2,8V - - - 170mA)
2x (2,8V - - - 80mA)
9V - - - 23mA
Nominal consumption:
2.74 kWh/month
Stand-by power consumption:
1.65 kWh/month
Product design and specifications are subject to change, without notice.
Product: AA, AAA and 9V NiMH & NiCd battery charger
Model: 903-210
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product
box or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was
received.
4.- Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
Full charge
Fast charge
1h
1h
6h
5 - 6h
12h
11- 12h
1h
1h
7h
6 - 7h
9h
8 - 9h
WARRANTY
CONDITIONS
In case your product fails
or have questions, please
contact your nearest dealer.
If you are in Mexico, please
give a call to our Call Center.
Call Center
01 800 500 9000
loading

Resumen de contenidos para Steren 902-210

  • Página 1 WARRANTY 1. Select the battery type, move the switch and select NiMH or NiCd. This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.
  • Página 2 Electrónica Steren S.A. de C.V. 4. Si desea colocar baterías AAA, baje el adaptador 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin integrado. ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.