Assembly; Before Starting - Bohmer-AG W Serie Operación Manual

W Series

Assembly

The rubber feet are positioned on the two sub frames of the
generator unit. Locate the four pre-drilled holes. Thread the
bolts through the rubber feet and secure using the nuts.

Before Starting

Add fuel:
1. Open the filler cap
2. Fill with unleaded petrol up to the filter
3. Replace filler cap
Add oil:
Note: The generator will automatically shut down if
insufficient oil is detected.
1. Place generator on a level surface
2. Open the oil dipstick
3. Fill with 10W-40 semi-synthetic oil up to the threads
4. Replace oil dipstick
© Böhmer-AG
English
The battery is connected
Black to '-' negative, red to '+'
positive. Secure with nut and
bolt then shield with terminal
covers.
Fuel gauge / filler cap
Oil filler bung
5