Product Description - Omega Lift 33020 Manual De Piezas E Instrucciones De Funcionamiento

Soporte adicional de alto alcance
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SAFETY and GENERAL
INFORMATION
Save these instructions. For your safety read,
understand, and follow the information provided with
and on this stand before using. The owner and operator
of this equipment shall have an understanding of the
stand and safe operating procedures before attempting
to use. The owner and operator shall be aware that use
of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in
the operator's native language before use of these jack
stands is authorized. If any doubt exists as to the safe
and proper use of these stands, remove from service
immediately.
Inspect before each use. Do not use if broken,
bent, cracked, or damaged parts (including labels)
are noted. Any stand that appears damaged in any
way, operates abnormally or is missing parts, shall
be removed from service immediately. If you suspect
that the stand was subjected to a shock load (a load
dropped suddenly, unexpectedly upon it), immediately
discontinue use until the stand has been checked by a
factory authorized service center (contact distributor or
manufacturer for list of authorized service centers). It
is recommended that an annual inspection be done by
qualified personnel. Labels and owner's manuals are
available from manufacturer.

PRODUCT DESCRIPTION

Omega High Reach Supplementary Stand is designed
to help prevent the tipping/ rocking of a vehicle while the
vehicle is engaged on an automotive lift. For use ONLY
under a properly secured automotive lift. It is to be
used in pairs to stabilize a vehicle during service. It is
not intended to support the lifted load, only to stabilize
the load as work is being performed under a properly
secured lift. The rated capacity of this device is
intended to be used as a reference of the working load
that this stand is capable of sustaining. The working load
is NOT increased if used in pairs. The working load of a
pair of stands shall not be considered to be more than
the rated capacity of a single stand. The rated capacity
of this stand is 4000 lb.
NEVER use high reach supplementary stand
!
to support a vehicle! Use a pair to prevent
vehicle tipping/rocking while vehicle is on an automotive
lift.
Saddle Pad (1)
Pin (3)
Grease Fitting (5)
Bearing (6)
Lock Pin (8)
Upper Link (14)
Leg (15)
Figure 1 - Model 33020 Components
Parts List for Model 33020:
Item
Part No.
1
T455-00002-000
2
T455-00003-000
3
*
4
T455-00001-000
5
*
6
*
7
T457-02000-000
8
T457-04000-000
9
*
10
*
11
T457-00003-000
12
T457-05000-000
13
T457-03000-000
14
T457-00002-000
15
T457-01000-000
16
T457-00001-000
(*)
T457-06000-000
2
(2) Saddle
(4) Height Adjustment
Handle
(7) Column Tube
(9) Bolt
(10) Nut
(11) Upper Plate
(12) Lower Plate
(13) Threaded
Column
(16) Lower Link
Description
Qty
Saddle Pad
Saddle
Pin, D6x40mm
Height Adjustment
Handle
Grease Fitting
Bearing
Column Tube
Lock Pin
HCS M8X15
18
Nut, Hex M8
18
Upper Plate
Lower Plate
Threaded Column
Link, Upper
Leg
Link, Lower
Hardware Kit
1
1
1
1
1
1
1
1
1
1
1
3
3
3
-
Tabla de contenido
loading

Tabla de contenido