Bulk-Bags And Holders - Nederman A Serie Manual De Instrucciones

See also:
• Figure 5 (471A Configurable)
•
Figure 6 (570A Configurable)
•
Figure 7 (600A Configurable)
•
Figure 8 (710A Configurable)
•
Figure 9 (722A Configurable)
NOTE! The figures above are only basic design schematics for the vacuum
cleaners. Individual parts of the different models may vary.
4.1

Bulk-bags and holders

Certain A products are equipped with bulk-bag holders for collecting material.
Other collection methods may be used if the system risk analysis finds them to
be safe.
Place a bulk bag on a pallet and position it under the bulk-bag holder. The
buckle on the bulk-bag holder secures the bulk bag opening to the holder, see
Figure 10(A).
Connect the bulk-bag corner straps to the chains on the bulk-bag holder.
Adjust the tension by moving the quick link up or down the chain, see Figure
10(B).
NOTE! Do not hang bulk bags by their corner straps. Straps are only intended
to keep the bag from collapsing. The weight of the collected dust/material
must be supported by the pallet, see Figure 10(C).
A - Vacuum Cleaners EN
23