Trueshopping SC38BM Manual Del Usuario página 12

Problem
Water emerges from the
attachment
The device does not work.
The control lamp does not
light up
No steam is produced
Streaks when cleaning
windows or other smooth
surfaces
Possible cause / solution
•
The device has not yet reached operating temperature. Wait
until control lamp has gone out
•
Water may emerge from the attachment when you first start
using it. This is normal and does not constitute a defect with the
device
•
Is the mains plug correctly inserted into the socket?
•
Is the socket defective? Try a different socket and check the fuse
of your mains connection
•
Is the water reservoir filled with water?
•
The device has not yet reached operating temperature. Wait
until control lamp has gone out
•
The pipe of the device is not yet completely filled with steam.
Press the steam trigger several times until steam emerges
•
Is the attachment clogged
•
Has the safeguard (13) been activated? Push in the securing pin
to release the safeguard
•
Is the scraper lip dirty? Wipe it clean
•
Is the scraper lip worn? Turn it over: Pull the rubber piece
sideways out of its holder, moisten with water or cleaning agent
in the rounded area and slide back into the holder the other way
around.
If after turning the rubber piece over both edges are worn, a new
rubber piece is required
SC38BM
12