Idiomas disponibles
Idiomas disponibles
27. Select the Smallest Step Washer that Best Fits Your Application and Will Apply Even Force to the Inner Bearing Race.
28. Assemble Tool Components as Shown (See Figure # 6) To Begin Installation of New Wheel Bearing Tighten Tapered Nut and Washer against
the bearing inner race By Hand Until Snug.
29. Hold the Tapered Nut While Turning the Pressure Screw. Continue Turning to Complete Installation of New Bearing into Hub.
30. An Alternative Method to Installing the Hub (See Figure # 6)
Figure 6
Hub
Bolt
Bearing
Bearing Housing
Stepped Washer 5, 6, 6H,
7, 7H, 8, 8A,12, 13, 14
7
Nut 2
