Cleaning; Safety Instructions; Cleaning The Housing; Cleaning The Fan Blades - Boneco F225 Manual De Usuario

16
CLE ANING
en

SAFETY INSTRUCTIONS

Always unplug the BONECO Air Shower Fan before
you begin cleaning! Failure to do so can result in
electric shock and fatal injury!
Do not use alcohol or corrosive cleaning agents for

cleaning.

CLEANING THE HOUSING

All BONECO Air Shower fans are designed for low-main-
tenance operation, even after years of use. In most cases,
a dry cloth can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp
cloth. Add a small amount of dishwashing detergent to
the water.

CLEANING THE FAN BLADES

1. Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by turning it counterclockwise
slightly.
3. Loosen the safety screw in the middle clockwise.
4. Remove the fan blades and clean them with a damp
cloth.
5. Put the unit back together by following the steps in
reverse order.
6. Attach the front grill with the safety screw. When
doing so, pay attention to the position of the screw
on the front grill.