Cleaning And Maintenance - Aria Mii Folleto De Instrucción

TIMER
• During working time, the machine will stop suction temporarily after 20 mins.
The machine is on standby. If you need restart the suction, just press the "ON/
OFF" button again.
• Press the "ON/OFF" button to start or stop the suction.

CLEANING AND MAINTENANCE

• All parts in direct contact with breast milk must be disassembled and cleaned
before next usage: Cups, Valve, Storage Container, Tubing, etc. Do not immerse
the main machine water for cleaning. Do not microwave any parts.
• Please clean all parts using detergent (for baby's safety and best results, use
Mii Organics Dish Liquid). Sterilize all parts by placing in boiling water (all parts
™
must be disassembled well, and the boil time must not exceed 15 mins.).
• Please keep cleaned parts separate without contacting the breast milk. Be sure
to wash all tubing, bottles and bottle stand before each use. The main machine
can be cleaned by wet towel (use Mii Organics™ Multi-Purpose Cleaner for
safest and best results).
• After pumping, check to make sure there is no milk in the collector cup and
soft tube. If there is milk in the collector and soft tube, you should power off
the machine at once. The collector and soft tube should be only be reused
after drying.
THE RIGHT TEAT FOR YOUR BABY
• Flutter Flex Slow Flow Teat™
• Flutter Flex Medium Flow Teat™
• Flutter Flex Fast Flow Teat™
• Flutter Flex Y-Cut Teat™