Installation - Glacier bay 35633BNHD Guía De Uso Y Cuidado

Installation (continued)
1
Connecting the mounting bracket
NOTE: The flat side of the 7/8 in. diameter tube assembly (C)
should be facing down.
□ With the arrows on the mounting bracket for the 7/8 in.
diameter tube (B) pointing up and down, fasten the 7/8 in.
diameter tube assembly (C) to the mounting bracket for
the 7/8 in. diameter tube (B) using mounting bracket screw
(BB) and threaded insert (CC). Tighten using the large hex
wrenches (EE).
□ Repeat this step for the 1 in. diameter tube (D).
2
Fastening the end cap
NOTE: Make sure the end cap dimples line up with the
notches in the mounting bracket.
□ Slide the end cap (E) onto the 7/8 in. diameter tube
assembly (C).
□ Snap the end cap (E) to the mounting bracket for the
7/8 in. diameter tube (B).
□ Repeat this step for the 1 in. diameter tube (D).
notches in the mounting bracket
5
Please contact 1-855-HD-GLACIER for further assistance.
CC
B
C
BB
flat side facing down
B
dimples on end cap
C
HOMEDEPOT.COM
E