Little Giant Climb ON PROJECT TRAY Manual De Instrucciones

READ THESE INSTRUCTIONS COMPLETELY BEFORE YOU START. IF YOU DON'T
UNDERSTAND THESE INSTRUCTIONS, PLEASE CALL 800-453-1192 FOR ASSISTANCE.
The Project Tray is a great addition to the Little Giant family. The Project Tray enables you to do a
wide variety of jobs with features for just about everything you need, including the following:
- Oversized dish for screws, nuts, bolts, etc.
- Drill holder
- Fitted trays for all standard paint can sizes, including quart and
gallon (round and square)
OPERATING THE PROJECT TRAY
Use the Project Tray on your Little Giant Ladder in the
A-frame position. To attach the Project Tray to your ladder,
please follow these steps:
1. Place the Project Tray hooks on the rung below your
desired platform height and place the lip of the tray over the
next rung up. (Figure 1)
2. Ensure the Project Tray is secure before putting tools on it.
(Figure 2)
3. When you are nished using the Project Tray, simply fold
it and store it inside the ladder. (Figure 3)
LITTLE GIANT PROJECT TRAY WARRANTY
Little Giant Ladder Systems warrants each new Project Tray to original purchaser thereof, to be free from defects in workmanship and materials when operated under normal conditions and
maintained properly. This warranty covers all parts of the Project Tray.
This warranty shall be in e ect for a period of one year from the date of purchase. This shall be in lieu of any other warranty, expressed or implied, including, but not limited to, any implied
warranty of merchantability or tness for a particular purpose. Certain states do not allow limitations on how long an implied warranty lasts. The above limitation may not apply.
Little Giant Ladder Systems will repair or replace, at its option and without cost to the original purchaser, any Project Tray which has been found defective and is within the period of
warranty. All freight to and from the factory is to be paid by the customer. The factory address is: Little Giant Ladder Systems, 1198 N. Spring Creek Place, Springville, Utah 84663
The liability of Little Giant Ladder Systems under this warranty shall be limited solely to repair or replacement of the Project Tray within the warranty period. Little Gaint Ladder Systems shall
not be liable, under any circumstances, for consequential or incidental damages, including, but not imited to, personal injury or labor costs. Some states do not allow the exlusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Thsi warranty gives the original purchaser speci c legal rights, and you may
have other rights which vary from state to state.
Under no circumstances will Little Gaint Ladder Systems be responsible for any expense in connnection with any repairs made by anyone other than the factory or authorized service station
unless such repairs have been speci cally authorized in writing by Little Giant Ladder Systems.
PROJECT TRAY INSTRUCTIONS
Warning:
Do not exceed
max weight of 25 lbs.
Warning:
Do not sit or
stand on the Project Tray.
®
- Screwdriver holes
- Slots for putty knives and speed square
- Drink holder
- Slotted holes for wrenches and extension cords.
Little Giant Ladder Systems
1198 N. Spring Creek Place
Springville, UT 84663
800-453-1192
LittleGiantLadders.com ©2012 Little Giant Ladder Systems 52378 v4 9.12