SilverCloud AP101 Instrucciones De Uso E Instalación

EN
INSTRUCTIONS FOR USE AND INSTALLATION
REMOTE TRANSFORMER SILVERCLOUD AP101
FOR ELECTROMAGNETIC LOCKS AND GATE AUTOMATION
Product specifications:
- Input: 220V AC 50Hz
- Output: 12 V dc / 5 mA
- Remote control distance: 50 m
Main functions:
- Long range
- 2 remote controls
- Easy to install
- Pleasant and practical design
- Compatible with any type of electrical or electromagnetic lock
- Omni-directional remote control
- Automatic block of the lock after opening
- Save electricity
Operation method:
1. In order to open the door, push the button on the remote control. The door will automaticaly open.
2. Add a new remote control: After plugging the receiver unit, within 10 seconds press and hold the button
for 3 seconds on the new remote control. You can add multiple remotes in the first 10 seconds of the power
receiver. After that, the receiver unit enters in the normal mode of functioning, while the remote controls can be
used for opening the electromagnetic lock.
3. Delete a remote control: After plugging the receiver unit, within 10 seconds press and hold the buttons
for 5 seconds on the new remote control. After that the receiver unit does not register signal from the
deleted remote control.
Notes:
If the remote control distance is low, replace batteries.
To keep the device performance, do not drop the remote control or wet.
Cable connection between the remote transformer and the electromagnetic lock should not exceed 10 m.
Do not power the remote transformer if it is in a moist environment.
If the surface temperature of the power supply is high, unplug it for approximately 10 minutes.
Installation schema:
1