3.
Pilot holes MUST be drilled to a depth of 3 in. (75 mm), using a 7/32 in. (5.5 mm) diameter drill bit.
3.
Tighten the lag bolts
17
CAUTION:
Avoid potential injuries or property damage! Improper use could reduce the holding power of the lag bolt
To avoid potential injuries or property damage. DO NOT over-tighten the lag bolts
3
only until the washers
are pulled firmly against the wall plate
16
3 in.
(75 mm)
7/32 in.
(5.5 mm)
.
14
.
17
4
16
17
.
17
14
9
