Switching Off The Electrical System; Adjustment Of Saddle And Seat Post; Adjustment Of The Handlebar Bend And Stem; Chain - Cicli Esperia 1281 Manual De Usuario Y Certificado De Garantia

7.

Switching off the electrical system

7.1. If the vehicle is not in use, we recommend that the user should always switch
off the electrical system by pressing the button on the handlebar controller and the
switch on the battery.
NOTE: Even if not used, the powered electric system will always consume a
small amount of energy that will slowly discharge the battery. In order to avoid
unnecessarily discharging the battery, whenever possible, we recommend
switching off the electrical system using the appropriate button.
8.

Adjustment of saddle and seat post

8.1. Always check that the saddle is always firmly attached to its housing and that the
latter is attached to the frame.
8.2. Once the seat post has been positioned in the frame housing, check that the
minimum insertion sign is not visible.
9.

Adjustment of the handlebar bend and stem

9.1. Always check that both the handlebar attachment and bend are firmly connected
to each other and with the fork sleeve.
9.2. Once the handlebar stem has been positioned in the fork sleeve housing, check
that the minimum insertion sign is not visible.
10.

Chain

10.1. Check that the chain is always in tension.
10.2. Check the correct alignment between the sprocket unit (cassette) and the
chain ring.
11.

Wheels

11.1. Check that the wheels are securely fastened: the rear wheel to the frame, the
front wheel to the fork.
NOTE: if equipped with quick release devices, check that the locking levers are
tightly closed and facing the frame or fork shaft.
11.2. Check that the tyre pressure complies with the instructions given on the side.
WARNING: malfunctioning or misalignment of any part of the bicycle can lead
to serious risks to your safety. Make sure you understand the operation of each
component and, in case of doubt, get help from your dealer.
12.

Pedals

12.1. Be sure to mount the left foot pedal on the left side and the right foot pedal on
the right side: you can easily recognise them by looking at the printed letter on the
pedal pin (L left, R right).
110