HoMedics AR-OTSC Manual De Instrucciones página 8

NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
When the air cleaner is on, the ON/OFF button on the control panel will be lit and
the air cleaner will start to operate on LOW speed.
• Once the air cleaner is ON, press the SPEED + button to increase the fan speed to
the MED. setting. Press again to increase the fan speed to HIGH setting. To
decrease the fan speed, press the SPEED – button until your desired setting is
reached. The fan speed setting is indicated by the illuminated ring around the
fan icon.
• To turn the air cleaner OFF, simply press the ON/OFF
control panel.
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours, and
12 (twelve) hours. To activate the timer press the TIMER + button on the control panel.
Each time the + button is pressed, it will display the successive settings. To return to
a setting already passed, press the TIMER – button. Once a timer setting has been
selected, it will remain displayed on the TIMER screen. To operate continuously, cycle
down through all timer settings until no timer setting is displayed.
Fig. 4
4. Place the tabs at the bottom of
the grill into the base of the unit.
Gently push the grill back into
place until you hear a click sound
indicating that the grill is firmly
latched. Fig. 4
Plug the power cord into a
standard AC outlet.
button on the control panel.
button on the
8