Steren WR-801UHF Manual Del Usuario página 13

MOUNTING THE WR-801UHF
This receiver includes a pair of brackets to install it in a rack. Remember
that you must use other receiver with the same specifi cations to install
them into a 10" standard rack. If you want, you can install the receiver
over a fl at surface.
Depending on your rack case design, it may be necessary to allow Depending on your rack case design, it may be necessary to allow
for suffi cient space for the antennas. for suffi cient space for the antennas.
CONNECTIONS
1.- Connect the AC power adapter to the receiver's DC INPUT
connector, then plug the adapter into a compatible AC electrical outlet.
2.- Connect the receiver to a sound system, mixer or amplifi er's
microphone input(s) with balanced or unbalanced output jacks.
3.- Use Squelch controls to diminish noise levels.
4.- Use volume control to set the volume level.
MICROPHONE BASICS
Microphone Position
The WR-801UHF is ideal for close-up vocals and can be held in the
hand or mounted on a mic stand. The most common applications and
placement techniques are listed below. Keep in mind that microphone
technique is largely a matter of personal taste, and there is no one
"correct" microphone position.
ENGLISH-13