San Jamar M Serie Hoja De Instrucciones página 4

WEIGHING AN ITEM
1. Turn on the scale.
2. Place an item on the platform.
3. The weight of the item will be displayed.
SELECTING WEIGHT UNIT
When the scale is powered on, press the MODE key to change weight unit
according to the following sequence:
kg — - lb — - oz — - lb/oz
USING THE HOLD FUNCTION
When the item is on the scale platform, press the HOLD key once and then
remove the item from the scale platform. The weight of the item will be held for
10 seconds with a "HOLD" icon displayed on the left side of the LCD.
USING THE TARE MODE:
1. Turn the scale on.
2. "0.000 " will be shown on the display after a few seconds.
3. Place an item on the weighing platform, and read the value accordingly.
4. Press the TARE key; the weight of the item will be eliminated, and the reading
will change to "0.000 " .
5. Place next item on the weighing platform, and note the reading.
6. Press TARE key again to show the total weight.
7. Repeat steps (4) to (6) when adding more items.
NOTE: The scale will display a negative reading when you remove all items. Press
the TARE key once, and the negative reading will disappear.
4