Operating The Computer - ISE SY-9000 Manual Del Usuario

OPERATING THE COMPUTER

SPECIFICATIONS:
TIME----------------------------------------------------
SPEED-------------------------------------------------
DISTANCE--------------------------------------------
CALORIES--------------------------------------------
FUNCTIONS AND OPERATIONS:
AUTO ON /OFF: When you start to exercise or press MODE button on the computer,
the computer will turn on. If you leave the equipment for 4 minutes, the power will shut
off automatically.
SCAN: Press MODE button until the arrow points to SCAN; the computer will
automatically scan the function every 4 seconds.
TIME: Press MODE button until the arrow points to TIME; the computer will display your
elapsed workout time in minutes and seconds.
SPEED: Press MODE button until the arrow points to SPEED; the computer will display the
current training speed.
DISTANCE: Press MODE button until the arrow points to DISTANCE; the computer will
display the accumulative distance traveled during workout.
CALORIE: Press MODE button until the arrow points to CALORIE; the computer will display
the total accumulated calories burned during workout.
(This data is a rough guide for comparison of different exercise sessions and should not be used in
medical treatment).
RESET: Press and hold MODE button for 3 seconds, all data values will clear to zero.
HOW TO INSTALL THE BATTERY:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" battery into the battery housing.
3. Insure battery is correctly positioned and battery spring is proper contact with battery.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove battery and wait 15
seconds before reinstalling.
00:00-99:59MIN: SEC
0.0-999.9 KM/H
0.00-99.99 KM
0.00-999.9 KCAL
14