On/Off Switch - Promaker PRO-LO180 Manual Del Usuario

3. Align the corner of the sanding
pad (10) with the corner of the hole
punch. This will ensure the holes are
punched in the correct location.
4. When the sanding pad is correctly
aligned on the hole punch, press the
sanding pad firmly onto the hole
punch.
NOTE: The sharp pegs in the hole
punch will pierce the sandpaper in
the correct location.
OPERATING INSTRUCTIONS
WARNING: To reduce the risk of
injury, let the tool work at its own
pace. Do not overload.
WARNING: Shock hazard. Under
no circumstances
product be used near water.
WARNING: Always wear safety
goggles or safety glasses with side
shields when operating your sander.
Failure to do so could result in
foreign objects being thrown into
your eyes resulting in possible
serious eye damage.
Always wear an appropriate dust
mask and hearing protection when
using your sander.
should this

ON/OFF SWITCH

To turn the switch ON, press the
button marked on the ON/OFF
switch (1) (Fig. E).
To turn the switch OFF, press the
button marked on the ON/OFF
switch (2).
SANDING
Clamp or otherwise secure your
workpiece to prevent it from moving
under the sander while being
sanded.
WARNING:
workpiece could be thrown toward
the operator causing injury.
Place the sander on the workpiece
so that the complete sandpaper
surface is in contact with the
workpiece. Turn the sander ON as
described above. Move the sander
slowly over
successive passes in parallel lines,
circles, or crosswise movements.
An unsecured
workpiece making
10