Uniteck UNIFIX 1C Manual Del Usuario página 13

ROOF PASS FIXING (PRODUCT NOT INCLUDED)

Drill a hole using a hole saw. Diameter between 15 and 20mm
 Clean the fixing zone with the provided degreaser (do not use alcohol/white spirit...).
 Put the provided glue on the area indicated in white on the picture below, then put it over the
drilling hole.
 Pass the cables as seen on the picture below. Keep a sufficient length for the connection. Tighten
the nuts of the cable gland to ensure waterproofness
www.uniteck.fr
EN
13/22