A. FOR THE FIRST USE
1.
Remove the coffee maker from the package, and check the accessories according to
the list.
2.
Clean all the detachable components according to the following section of
"CLEANING AND MAINTENANCE". Then assemble them completely.
3.
Ensure the filter place in position. Place the carafe on drip tray.
4.
Operation the appliance according to the section of "B" and "C" (no coffee powder in
filter). Repeat 2-3 times.
B. MAKE ESPRESSO COFFEE
1. Remove the cover by turning it in anti-clockwise. Pour appropriate water in water tank with
the carafe. Do not exceed the maximum capacity.
Note: 1). the carafe has the cup marks, the maximum tank capacity is equal to 4 cups marks
water quantity. The minimum tank capacity is equal to 2 cups marks water quantity.
2). Before pouring the water into the water tank, be sure the power cord is unplug
from the power outlet and the knob is in
2. Replace the cover in place by turning the cover in clockwise until it locks in position.
3. Put the filter into pressurized funnel, pour coffee powder into the filter with coffee spoon
(240ml water with 4 cups of coffee powder, 120ml water with 2 cups of coffee Then Press
the coffee powder tightly powder,the filter has 2 cups and 4 cups marks.)with the circular
flat side of the coffee spoon.
4. Make sure the tubers on the funnel align with the grooves in the appliance, then insert the
funnel into from the "INSERT" position, and you can fix the funnel into coffee maker
firmly through turn it anti-clockwise until it is locked in the "LOCK" position
(see Fig. 1).
position.
5. Place the carafe on the drip tray.
6. Plug the power cord into the outlet.
Turn the knob to
position, and the indicator
is illuminated, about 2 minutes, the coffee will
flow out.
7. After desired coffee has obtained, you should
turn knob to
position, the indicator go out and
the coffee maker stops working, your coffee is ready now.
Then remove the carafe and turn the knob to
steam in the tank.
WARNING: Do not leave the coffee maker unattended during making coffee, as
you need operate manually sometimes!
-
Before removing pressurized funnel or opening the cover, make sure the pressure in the
8.
tank shall be released. The method is to turn the knob to the
the steam in the tank will eject from the frothing device. After pressure has released,
and wait for the pressurized funnel cooling down, you can remove the pressurized
funnel or open the cover.
After finishing making the coffee, you can take the pressurized funnel out through
9.
turn clockwise, and then pour the coffee residue out with the filter pressed by funnel
hook. Let them cool down completely, then rinse under running water. (When
assemble the filter again, you shall turn over the funnel hook to the original position).
C. FROTHING MILK/ MAKE CAPPUCCINO
position release the residual
position firstly,